Ian Walton

Piper Super Cub

    Home

The model was built from a Graupner 21" Rubber powered kit & converted to 3ch R/C using 2 x 5g HXT servos, a 1404N 2290Kv 9.2g 3.5A 160g Thrust Outrunner,   a TURNIGY Plush 6A /.8bec/6g Speed Controller, a Rhino 360mAh 2S 7.4v 20C Lipoly Pack, and a 6 x 3 DD prop. Flying weight 6oz